PRODUCTS

201 Stainless Steel Pipe

201 Stainless Steel Pipe

Type 201 stainless steel is an austenitic chromium-nickel-manganese stainless steel, which is developed to save nickel. Type 201 is a low-cost alternative to traditional Cr-Ni stainless steels such as 301 and 304. The nickel is replaced by added manganese and nitrogen. It cannot be hardened by heat treatment, but can reach high tensile strength by cold working. Type 201 is essentially non-magnetic in the annealed condition and becomes magnetic upon cold working. In many applications, the 201 type may replace the 301 type.

A106 Grade B Steel Pipe

A106 Grade B Steel Pipe

ASTM A106 is suitable for seamless carbon steel pipe for high temperature environment. ASTM A106 pipe is manufactured according to grade A, B and C. A106-A is equivalent to the domestic 10# steel material, A106-B is equivalent to the domestic 20# material, is a relatively common use of a steel pipe material at home and abroad. A106 seamless steel pipe is mainly used in construction, mechanical processing, electrical, petrochemical and other industries.

304 Stainless Steel Pipe

304 Stainless Steel Pipe

304 stainless steel is a kind of universal stainless steel material, rust resistance than 200 series of stainless steel material is stronger. High temperature resistance is also better, can be as high as 1000-1200 degrees. 304 stainless steel has excellent corrosion resistance and good intergranular corrosion resistance. For oxidizing acids, it is concluded in the experiment that 304 stainless steel has strong corrosion resistance in nitric acid with a concentration of less than or equal to 65% of the boiling temperature. It also has good corrosion resistance to alkali solution and most organic and inorganic acids.

A252 Seamless&Welded Pipe Piles

A252 Seamless&Welded Pipe Piles

ASTM A252 is the standard specification for nominal-wall cylindrical steel pipe piles, where the cylinder acts as a permanent load-bearing member or shell to form a cast-in-place concrete pile. Welding mainly provides ASTM A252 submerged arc welded steel pipe piles for agricultural, construction and load bearing geotechnical applications. The ASTM A252 specification has three grades: Grade 1, Grade 2, and Grade 3, of which Grade 2 and Grade 3 are commonly used materials.

A333 Seamless & Welded Steel Pipe

A333 Seamless & Welded Steel Pipe

ASTM A333 is the standard specification for seamless and welded carbon and alloy steel pipe for low temperature applications or other applications requiring notch toughness. This standard covers several grades of ferritic steel: Grade 3, Grade 4, Grade 6, Grade 7, Grade 8, Grade 9, Grade 10 and Grade 11.

A335 Seamless Steel Pipe

A335 Seamless Steel Pipe

ASTM A335 steel pipe may be hot finished or cold drawn and subjected to the following finishing heat treatment. The specification covers "chrome-molybdenum" seamless pipes with excellent corrosion resistance and high temperature tensile strength. Generally, ASTM A335 P11, P22, and P91 pipelines are used for power generation and downstream oil and gas, and P5 and P9 grades are used for refinery applications.

GB/T8162 Seamless Steel Pipe

GB/T8162 Seamless Steel Pipe

Seamless steel pipe for general structure (GB/T8162-2008) is a seamless steel pipe for general structure and mechanical structure.

DIN 17175 Seamless Steel Pipe

DIN 17175 Seamless Steel Pipe

DIN 17175 is suitable for seamless pipes and is used in the construction of boilers, pipelines, pressure vessels and equipment. The maximum temperature can reach 600 ℃. At the same time, under high pressure, the total stress and related fouling conditions can increase or decrease the temperature limit.

DIN 1629 Seamless Steel Pipe

DIN 1629 Seamless Steel Pipe

DIN 1629 seamless steel pipe its main grades are St37.0, St44.0, St52.0, DIN 1629. Generally, the DIN 1629 standard is not limited to the working pressure value, and the working temperature is limited to below 300 ℃.

EN 10210/S355 Seamless Steel Pipe

EN 10210/S355 Seamless Steel Pipe

Grade S355 is a low carbon manganese-containing steel alloy. This medium-strength carbon steel has both good weldability and good impact resistance. Grade S355 steel is also well suited for sub-zero temperature applications.

< 123456 >
%E7%AC%AC%E4%B8%80%EF%BC%8C%E6%9C%80%EF%BC%8C%E4%BC%98%E7%A7%80%EF%BC%8C%E5%A2%9E%E5%BC%BA%EF%BC%8C%E4%B8%80%E6%B5%81%EF%BC%8C%E5%8D%93%E8%B6%8A%EF%BC%8C%E9%A2%86%E5%85%88%EF%BC%8C%E5%85%88%E8%BF%9B%EF%BC%8C%E5%BC%95%E9%A2%86

Sorry，当前栏目暂无内容!

您可以查看其他栏目或返回 首页

Sorry，The current column has no content!

You can view other columns or return Home

MAIN PRODUCTS

CONTACT INFORMATION

Tel：+86 15166584447

WhatsApp：+86 15166584447

Email：steel@zgsteelcoil.com

ADD：Liaocheng · Shandong ·China

Whatapp

WhatsApp

Wechat

WeChat

Get in Touch

Submit Message →

Copyright ©

Powered by CEGglobal  |  SEO | Privacy policy

【 Business license】